Rhino

  • VORTEX LEG HEIGHT SPACERS

    Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.

    $22.00
  • The Foxwing Pole Service Kit consists of a replacement hinge which has been engineered to withstand most conditions the Foxwing Awning might be exposed to. Made from an engineered plastic which replaces the cast alloy design of the regular hinge, this product is quick and easy to replace.

     

    $22.00
  • Rhino VA Vortex Underside Measure Strips x4

    $22.00
  • The RABK Aerial Mount Bracket is used to attach a standard aerial and a range of other products to your Rhino-Rack Heavy Duty bar. The use of a shake proof washer reduces the loosening of bolts due to vibration while driving on corrugated roads. The Aerial Mount Bracket is made from zinc plated mild steel so it won't corrode during extensive outdoor use. It is simple to fit and will ensure that your aerial is secured for all on and off-road activity.

    Features:

    • Used to mount aerials
    • Attached to Rhino-Rack Heavy Duty bars
    • Shake proof washer reduces risk of bolts loosening on corrugated roads
    • Easy to fit and adjust
    • Made from zinc plated mild steel so it won't corrode
    $22.01
  • The Vortex Aerial Bracket is used to attach a standard aerial to your Rhino Vortex bar. It is simple to fit and will ensure that your aerial is secure for both on and off road adventures. This product is made from zinc plated mild steel so won't corrode. It also utilises flat steel washers to ensure the hardware of the Vortex Aerial Bracket does not come loose when driving on corrugated roads. This Aerial Bracket will also fit a light small light for ultiumate versatility.

     

    $24.00
  • Rhino Quick Mount Hd Spacer

    The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. Sold as a pair of 2. 
    Available in 5mm, 10mm, 25mm, 30mm

    $20.00
  • Rhino S400 Fit Kit For Rola Sportz Bar

    Features:

    Suits Rhino Sportz Bar, Rhino Heavy Duty Aero Bar, Thule Aero Bar and Rola Universal Rails Bars. This fit kit consists of 4 t-bolts, washers and wing nuts to secure the S400 cradles to the roof racks.

    $27.00
  • The Rhino-Rack Thru Axle Insert allows 15mm x 110mm thru-axle bikes to fit the Multi-Axle adaptor and attach to existing bike carriers.

     

    Features

    • The inserts are blue anodised aluminium to prevent rusting
    • 15mm x 110mm (0.6 inches x 4.3 inches) Thru Axle Insert (Mountain Bikes)
    Dimensions
    • Length 110 mm 
    • Width 15 mm
     
    Product Weight
    • 0.1 kg
     
    Warranty
    • 3 Years
    $24.00
  • The VA Underside Tie Down Point is the perfect accessory to complement your Rhino-Rack Vortex crossbar system by creating a secure tie down point for your straps.

    Being discretely installed on the underside of the crossbar frees up space on your Rhino-Rack roof rack to carry items, especially for wider loads. You can rest be assured that by using the VA Underside Tie Down Points, your tie down straps will not slip off the outer edges of the crossbar if your load moves.

    Compatible with Vortex racks

     

    $29.00
  • Rhino Sportz Eye Bolts (S604)

    Made from Galvanised metals, and sold as a pair, the S604 is a perfect tie off point that can be mounted to the Rhino Sportz and Rhino Aero bars.

    Fits

    • Thule Pro Bar
    • Thule Wingbar
    • Rhino Vortex Bar
    • Whispbar
    $32.00
  • Rhino M6 x 16mm Dowel Nut in a pack of 10 

    $32.00
  • This Pioneer Worklight Bracket is made from corrosion resistant powder coated steel, allowing you to fit work lights or spotlights to any Rhino-Rack Pioneer System. The Bracket can be mounted to all sides of the Pioneer at varying heights. 

    $35.00
  • Don’t let your tent or awning blow away with the wind. Rhino-Rack’s specially designed Sand Screw takes the hard work out of securing your tent and awning to the ground. It is suitable for both sand and outdoor environments and perfect for environments where other tent pegs fail to hold.

    It is designed for an extremely strong Engineered plastic with a unique screw flute and comfortable grip handle for winding it into the Sand.

    Features:

    • Easily screws into the ground vertically
    • Easy to remove
    • Makes your tent and awning more secure in windy conditions
    • Suitable for sand and outdoor environments
    • 5 Year Warranty
    • Available in a set of 2 Sand Screws
    $37.00
  • Rhino M10 Turn Knob

    Replacement M10 Turn Knobs suitable for the recovery tracks bracket or shovel holders. 2 turn knobs included.

    $38.00