Rhino Foot Packs

Rhino Foot Packs
  • This front/rear crossbar wedge kit is designed to have the legs level to enable a Pioneer system to mount straight on.

     

    $10.00
  • The 5mm Quick Mount Base Wedge is designed to create a level bar when fitting an RLT600 Quick Mount leg to a track position that is curved or angled.

    It is very important to create a level leg position especially when fitting Pioneer systems onto the RLT600 legs. This will ensure the Quick Mount legs to easily click in and out.

    Sold as a pair.

     

    $16.00
  • This front/rear wedge kit is designed to have the legs level to enable a Pioneer system to mount straight on.

     

    $16.00
  • Rhino 100 mm Leg Height Spacer Pair

    Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.

    Each spacer is 10mm high, and this pack comes with 2 x spacers and 2 x M10 (35mm) bolts.

    Features:

    • Designed specifically to fit Rhino-Rack Heavy Duty bars.
    • Provides one bar with a 10mm increase in height.
    $19.00
  • The PLHS1 Pioneer Leg Height Spacers are designed to raise the Pioneer Roof Trays to allow the legs to slide out wider onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler. 4 spacers are included in this kit.

     

    $22.00
  • The internal backing mounts used to fit a Quick Mount™ RLT600 leg onto a canopy. This item is suitable for 2 bars as it includes 4 mounts. A foam pad is included to be cut to size so that when you do use this item, it won't damage the paint of your canopy.

    $74.00
  •  
     
     
    The Rhino-Rack RL Leg Brackets are specially designed heavy duty legs to fit to gutter mounts on a vehicle. RL Legs come in a variety of shapes designed to fit specific vehicles. There are four main leg heights depending on how much clearance your roof racks need. RL legs come in 110mm, 150mm, 210m and 280mm heights. Rhino-Rack RL Legs are also compatible with Rhino-Rack Vortex Bars.
    $125.00
  • Rhino Rlt50 Leg Set

    The RLT500 is a trackmount leg specifically designed to be compatible with the RTC and RTS tracks. This setup allows you to position your roof rack system along the track for added flexibility. The legs are sold as a pair.

    $132.00
  • Rhino Legs Track Mount (High) Rltf

    The Rhino-Rack RLTF Legs are attached to your roof via a set of removable mounting brackets or Rhino's own tracks. Its high profile design is ideal for highly curved roofs or when the extra height is required to level out multiple bars.

    $139.00
  • Rhino Legs Track Mount (low) Rltp

    The Rhino-Rack RLTP Legs are attached to your roof via a set of removable mounting brackets or Rhino's own tracks. Featuring a low profile design, this system is aesthetically pleasing and maintains its looks after years of continuous use.

    $139.00
  • Rhino have updated their popular range of flush legs to a new low and high version. Now locking. Now fits the VA bar extrusion. The RVH is the high locking leg (65mm / 2.5") and comes in a set of 4 for 2 cross bars.

    Ideal when used with the RCP-BK for flush bar surface mounts, RTV-BK for track mounts. 

    $149.00
  • Rhino have updated their popular range of flush legs to a new low and high version. Now locking. Now fits the VA bar extrusion. The RVL is the low locking leg (45mm / 1.7") and comes in a set of 4 for 2 cross bars.

    Ideal when used with the RCP-BK for flush bar surface mounts, RTV-BK for track mounts. 

    $149.00
  • Rhino Fixed Mount Leg Kit (High) Rfms

    The Heavy Duty RFMS roof rack system permanently attaches to your roof via rivets. Its high profile design is ideal for highly curved roofs or when the extra height is required to level up multiple bars.

    Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveller, cyclist, surfer or tradesperson - the Heavy Duty RFMS roof rack system has you covered.

    Features:

    • Low profile design makes for a great look on your roof
    • Strong and built to last
    • Compatible with a wide range of accessories
    • Tested and approved to meet Australian Standards AS1235-2000
    $157.00
  • Rhino Fixed Mount Leg Kit (low) Rfmps

    The Heavy Duty RFMPS roof rack system permanently attaches to your roof via rivets. Featuring a low profile design, this system is aesthetically pleasing and maintains its looks after years of continuous use.

    Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveller, cyclist, surfer or tradesperson - the Heavy Duty RFMPS roof rack system has you covered.

    Features:

    • Low profile design makes for a great look on your roof
    • Strong and built to last
    • Compatible with a wide range of accessories
    • Tested and approved to meet Australian Standards AS1235-2000
    $165.00
  • Generic Tracks for vehicles. Sold as a pair, 1480mm (58.3") and includes hardware and end caps.

    Note- generic images only, actual product may differ from photos

     

    $165.00
  • For lighter load situations where utility posts are not required. The Heavy Duty Pickup Canopy system is the ideal solution for carrying longer items including ladders and conduits. Its key feature is a base which swivels to allow a better fit to a wider variety of roof shapes including flat, angled and curved. Additionally, its high profile design is ideal for highly curved roofs or when the extra height is required to level out multiple bars.

    The RFMC also comes with the GE backing plate which covers up the mounting hardware on the under side to give the inside of your canopy a neat and tidy look.

    Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a tradesperson, traveller, cyclist or surfer - the Heavy Duty RFMC roof rack system has you covered.

    Features:

    • High profile design is ideal for highly curved roofs or levelling bars
    • Strong and built to last
    • Compatible with a wide range of accessories
    • Tested and approved to meet Australian Standards AS1235-2000
    $167.00