Rhino
-
Rhino 3.0 m CSL Ladder Rack
The Rhino Rack CSL Ladder Rack Rail Set provides a solution for either your Extension or Step Ladder to be transported on your vehicle. The CSL systems have a rear roller to assist guiding the ladder onto the PVC protection along the aluminium rails.
$713.00 -
The Rhino-Rack Backbone is an interior structure set up on the inside of the vehicle. Three plates on each side of the roof are connected with the interior frame extending your roof line to carry heavier loads with the max load rating of up to 120kg or 264lb.
The RJKB1 Rhino-Rack Backbone comes with:
- All the internal support frames
- Mounting Plates so you can attach a 2 or 3 bar roof rack system or the Pioneer Platform
- Fitting Hardware required for the install
$576.00 -
Rhino-Rack Backbone Mounting System - Long Guttermount Backbone (Curved Gutters)
The Rhino-Rack Backbone has been specifically designed to suit the Toyota Landcruiser 80 Series wagon & the Nissan Patrol GU wagon. This Rhino Backbone utilizes the factory gutters and mounts directly to them. Offering a new and stylish, yet well established and proven mounting solution for our iconic Pioneer Platforms.
Overview
- Stylishly designed to suit rugged off-road conditions
- Made from non corrosive Stainless Steel allowing you maximum carrying capacity
- Vehicle specific clamping mechanism to secure Backbone to roof gutter
- Easy fitment utilising the proven Rhino-Rack gutter clamping system
- Compatible with Rhino-Rack Pioneer Platform 52104. Compatibility with 45104B, and 41104 requires supplementary fitting kit. (SUB0836)
NISSAN Patrol GU 4dr 4WD LWB 12/97 to 04/17
TOYOTA LandCruiser 80 Series 4dr 4WD 05/90 to 03/98
$999.00 -
Rhino Backbone Long Guttermount Flat Gutters - Toyota Landcruiser 76 Series
The RGMB1 Rhino-Rack Backbone has been specifically designed to suit the Toyota Landcruiser 76 Series wagon. This Backbone utilizes the factory gutters and mounts directly to them. Offering a new and stylish, yet well established and proven mounting solution for the iconic Pioneer Platforms.
- Stylishly designed to suit rugged off-road conditions
- Made from non corrosive Stainless Steel allowing you maximum carrying capacity
- Vehicle specific clamping mechanism to secure Backbone to roof gutter
- Easy fitment utilising the proven Rhino-Rack gutter clamping system
- Compatible with Rhino-Rack Pioneer Platform 52104. Compatibility with 45104B, and 41104 requires supplementary fitting kit. (SUB0836)
- TOYOTA LandCruiser 76 Series 4dr 4WD 03/07 On
Backbone Length - 1,864 mmBackbone Weight - 11.2 kg$999.00 - Stylishly designed to suit rugged off-road conditions
-
Rhino Pioneer Tray
The Rhino Pioneer Tray allows you to load your gear in the safest and securest way possible. Constructed from strong, durable and lightweight aluminium together with glass-reinforced corner to increase corrosion resistance, the Pioneer Tray stands up to the toughest conditions Rhino Rack have been able to test it in.
Overview
The Rhino Pioneer Tray has been designed for the adventurer in mind offering the most modular and versatile roof top solution in the market. Compatible with a wide range of accessories, the Pioneer truly allows for you to build your ideal set up for every adventure.
Features:
- Made from aluminium and fiberglass re-enforced nylon corners
- Black powder coated for increased corrosion resistance
- Most versatile and modular full rack on the market
- Includes a fully-welded and closed rail for extra strength
- Includes built in underbars
- Compatible with many Pioneer Specific and Rhino-Rack accessories
- Versatile between weekends and work days
- Side rails act
- Full rail acts as a grp for easy loading
- Hand grips on side rails for ease of loading
- 5 year warranty
Sizes in the range - please contact us for further details
RHINO PIONEER TRAYS
41100
1400 X 1140
41101
1400 X 1280
41102
1800 X 1140
41107
2000 X 1140
41104
2000 X 1330
$1,449.00 -
Rhino Pioneer Platforms
The Rhino Pioneer Platform is the ultimate load carrying solution for your vehicle. Rhino's latest range of Pioneer Platforms allow you to change the way you carry and complete your off-road roof top set up. With additional accessories channels in the front and rear extrusions we have increased the modular set up abilities of our system. Tested in the harshest conditions, the Pioneer is made with strong, durable and lightweight aluminium together with fiberglass re-enforced nylon corners. The Pioneer Platform has been specifically designed to carry most existing Rhino-Rack accessories - making it the most versatile and modular platform on the market.
The Pioneer Platform has been constructed from aluminium and powder coated to increase corrosion resistance. The Platform is finished off with glass reinforced nylon corners which provide users a useable space to access the internal wiring channels of the Pioneer.
The Pioneer Platform has been designed for the adventurer in mind offering the most modular and versatile roof top solution in the market. Compatible with a wide range of accessories, the Pioneer truly allows for you to build your ideal set up for every adventure.
Features:
- Stylish and aerodynamically designed
- Made from aluminium and fiberglass re-enforced nylon corners
- Black powder coated for increased corrosion resistance
- Most versatile and modular full rack on the market
- Faster installation with Integrated measuring strip
- Additional accessory channels on front and rear extrusions
- Channel on underside of front and rear extrusions
- Integrated wiring capabilities within all extrusions
- Corners can be drilled/cut out to provide access to wiring
- Compatible with many Pioneer Specific and Rhino-Rack accessories**
- Included torque limiting tool ensures fasteners are properly tightened and makes regular maintenance easy
- ** A selection of accessories require upgrading
External Dimensions:Height 47 mmDisclamer:
Rhino Pioneer Platforms are designed and sized to fit specific vehicles only. To see if there is a Pioneer Platform that will fit your vehicle, please call the team at the Roof Rack Shop on 09-486 6650
Prices Do Not include Foots packs or fit kits.
$1,299.00 -
Rhino Pioneer 6 Platform
The Rhino Pioneer 6 Platform is the ultimate roof rack that expands your adventures—not just your vehicle's capabilities. Designed to be the pinnacle of engineering, the Pioneer 6 Platform is a leap ahead of the already impressive predecessors and challenges the boundaries of aerodynamics and durability. Born for the trailblazers, forged without compromise, the Pioneer 6 Platform isn’t just an extension of your vehicle—it's an expansion of your potential.
Rhino's strongest and most versatile roof rack ever, yet it still boasts up to a 60% reduction in drag, a 20% reduction in weight, and 25% more usable channels—enabling every inch of the platform to be utilised for mounting accessories. Quieter and lighter than ever, our unique alloy components and scuff-resistant coating ensure there’s no compromise on quality, allowing you to load more than ever before without sacrificing your gear for adventure. With integrated wiring capabilities, additional east/west mounting channels, and the most comprehensive ecosystem of accessories on the market, the Pioneer 6 Platform makes you the Pioneer of your adventure!
- Quietest & lightest Rhino-Rack Pioneer Platform… Ever!
- Up to 60% reduction in drag from its predecessor
- Stronger alloys that maintain strength but reduce weight by 20% too
- No channel apertures make 100% of the platform usable for mounting accessories
- Improved performance with up to 25% more usable channels
- Our hardest coating ever, reducing damage and scuffs
- East/West mounting channels for more mounting options than ever before
- Integrated wiring capabilities within all extrusions
- Detachable wind fairing inserts in leading-edge further enhance drag reduction
- Most comprehensive ecosystem of accessories for mounting everything from kayaks to fishing rods in seconds
Dimensions:
Height 45mm
62100 Length 1500mm / Width 1240mm
62102 Length 1900mm/ Width 1240mm
62103 Length 1900mm / Width 1380mm
62104 Length 2100mm / Width 1430mm
62105 Length 2700mm / Width 1472mm
62107 Length 2100mm / Width 1240mm
62108 Length 1800mm/ Width 1430mm
62109 Length 1300mm / Width 1240mm62110 Length 1300mm / Width 1380mm
62111 Length 1300mm / Width 1430mm
62112 Length 900mm / Width 1430mm
62113 Length 1500mm / Width 1430mm
Prices Do Not include Foots packs or fit kits.
$1,364.00 - Quietest & lightest Rhino-Rack Pioneer Platform… Ever!
-
Rhino Pioneer Tradie Platform
The Rhino Pioneer Tradie is designed to transport ladders, pipes and work-related products like timber on your 4WD or utility. Made from reinforced nylon and aluminium the Pioneer Tradie stands up to the toughest conditions you can throw at it. Perfect for carrying longer loads as the added rails provide support
The powder coating is non-corrosive and the Tradie colour won't fade in the sun. Choose the Pioneer Tradie for work and adventure because it works as hard as you.
Unlike standard Pioneer Platforms the Tradie comes with side rails as standard. The fully-welded side rail makes loading and unloading your gear easier by making use of simple hand grips. Relax knowing that your equipment is safe on the road.
At the weekend campers and explorers will love the Tradie’s compatibility with the Rhino Jerry Can holder, Luggage Bag, Spare Wheel or Foxwing Awning. Then get back into work on Monday and add the shovel and high lifting bracket, Rhino ladder, or Pioneer Combination Bracket just to name a few.
Get out on the road quicker without having to leave any of your gear at home. So whether you’re heading to the coast for a weekend of fishing, tackling a new project, or travelling on an overland adventure the Pioneer Tray is the ideal transport solution for you.
Features
- Stylish and aerodynamically designed
- Minimal wind drag and noise on the road
- Non corrosive so it won't rust or fade
- Made from reinforced nylon and aluminium
- Allows you maximum carrying capacity
- Includes a fully welded closed rail for extra strength
- Side Bars included with the Pioneer Tray
- Compatible with many Rhino-Rack accessories
- Versatile between weekends and work days
- Hand grips on side rails for ease of loading
Rhino Pioneer Platforms are designed and sized to fit specific vehicles only. To see if there is a Pioneer Platform that will fit your vehicle, please call the team at the Roof Rack Shop on 09-486 6650
Prices Do Not include Foots packs or fit kits.
RHINO PIONEER TRADIE PLATFORM
45109B
1328 X 1236
45110B
1328 X 1376
45100B
1528 X 1236
45101B
1528 X1376
45102B
1928 X1236
45107B
2128 X 1236
$1,249.00 -
Rhino Batwing Awning With Stow It - Left
The Rhino Batwing Awning (Left) with STOW iT mounts to the left side of the vehicle and when opened, extends 2.5m/98” the Batwing Awning a perfect addition to any adventure.
The 10m2 of coverage is provided by a CPAI-84 compliant (fire standard), mould resistant ripstop fabric that has been tested and rated to UPF 50+. Purchase any of our optional extra side walls for easy conversion into a fully enclosed space.Features
- Extends 2.5m from edge of vehicle and wraps 270 degrees around the left and rear giving 10m2 coverage
- Premium awning fabric developed for CPAI-84 compliance, mould resistance and UPF50+ protection
- Includes the new STOW iT Awning bracket that allows quick and easy removal of the Batwing Awning for storage when not in use
- The STOW iT mounting brackets are mounted using the new patented Zwifloc channel nuts that allow the brackets to be placed anywhere without moving other accessories
- Weatherproof PVC bag with rust proof zips
- Includes standard pegs, guy ropes, spare parts, fixing strap and tools
- Optional side walls available (Sold separately)
- Colour - KhakiDimensionsHeight 2,300 mm / Length 2,500 mm / Width 2,500 mmMount Position - LeftProduct Weight - 19.5 kg (Including Brackets)
$1,569.00 - Extends 2.5m from edge of vehicle and wraps 270 degrees around the left and rear giving 10m2 coverage
-
Rhino Suzuki Jimny Overlanding Kit
Introducing the Rhino Suzuki Jimny Overlanding Kit (ROLS1), a lightweight yet durable roof rack system for your off-road rig. Featuring a refined Pioneer™ LT tray that minimises added vehicle height and system weight whilst still maintaining durability for your roughest adventures. Combined with the DIY friendly gutter clamp backbone, the entire system is adventure ready with only a 45-minute installation.
Available for pre-order - estimated arrival June 2023
- 100% load capacity in all conditions
- Utilises Pioneer™ LT tray to minimise system weight
- # Of Planks - 5
- DIY friendly, easy to follow instructions
- 45 minute, no drill, non-invasive installation with tools included
- Durability tested to ensure it is suitable for overlanding and off-road use
- Add a 2.0m Sunseeker and still be under your load limit
Leg Profile
Backbone Length 1453mm Width 1339mm Net Weight 19.5kg Pioneers Systemst Complete platform kit Compatible with SUZUKI Jimny JB74/Gen 4 2dr SUV 01/19 On
$1,899.00 - 100% load capacity in all conditions
-
Rhino Jeep Overlanding Kit
Introducing the Rhino Jeep Overland Kit (ROLJ1), a lightweight yet durable roof rack system for your off-road rig. Featuring a refined Pioneer LT tray that minimises added vehicle height and system weight whilst still maintaining durability for your roughest adventures. Combined with the DIY friendly gutter clamp backbone, the entire system is adventure ready with only a 45-minute installation.
Contact us now to order - estimated arrival June 2023
- 100% load capacity in all conditions
- Utilises Pioneer™ LT tray to minimise system weight
- DIY friendly, easy to follow instructions
- 45 minute, no drill, non-invasive installation
- Durability tested to ensure it is suitable for overlanding and off-road use
- Compatible for Jeep Wrangler JK and JL, and Gladiator JT variants
- # Of Planks 5
Leg profile Backbone Length 1453 Width1493mm Pioneer System Complete rack Net Weight 21.8 kg
Compatible vehicles
JEEP Wrangler JK 4dr 4WD Hard Top 02/11 to 03/19
JEEP Wrangler JL 4dr 4WD Hard Top 04/19 On
JEEP Wrangler JL 2dr 4WD Hard Top 04/19 On
JEEP Gladiator JT 4dr Ute 06/20 On
$2,699.00 - 100% load capacity in all conditions