Rhino Stow It Roller Adaptor
Rhino Stow It Roller Adaptor - 2 pack
The STOW IT Roller Adapter provides roller installation flexibility to anywhere on the perimeter of the Pioneer platform or Rhino-Rack crossbars. The Roller Adaptor is used in conjunction with the STOW IT starter kit where it simply slides into the STOW iT Starter Kit base bracket wherever it is mounted.
Overview
- Slides in and out of the STOW iT base bracket for flexible mounting options
- Base bracket can be fixed directly to Pioneer platforms, Reconn-Deck bars and Vortex bars
- Built tough for the harshest outback terrains
- Contents Included: Pair of Roller Adapters, hardware & Torx driver bit
- To be used with STOW iT Starter Kit base bracket (SSIT)
Note: To complete the installation a roller will need to be purchased from the Rhino-Rack LR range. Rollers come in lengths of 470mm, 615mm, and 680mm.
You May Also Like...
-
Rhino Pipe Clamps (RPC4)
Made from galvanised steel, the 4” (100mm) pipe clamps are sold as a pair.
They fit into the top channel on a Rhino Heavy Duty cross bar, and secure with an m8 bolt and nyloc nut.Fits
- Rhino HD Bar
- Whispbar HD Bar
- Yakima Bar
$62.00 -
Want to add security and piece of mind to your setup? Our new Cable Core Lockdowns fit neatly into the C channel of your Vortex crossbars or Pioneer product and are available in three different length cables. Ergonomically designed to suit a wide range of crossbar brands and simple to install with the supplied Allen key. They come with one key and barrel and are Masterkey compatible so you can match your racks and accessories.
So whether it's your ladder at work, your kayak after play or a gas bottle on that next big adventure, you can be sure it is locked down when you're not around.
Features:
- Made from plastic-sheathed steel intertwined cords
- Comes with one key and one lock
- Masterkey compatible
- 3 year warranty
Three Sizes:
- 60cm / 23'' in length
- 120cm / 47'' in length
- 180cm / 71'' in length
Fits
- Thule Pro Bar
- Thule Wingbar
- Rhino Vortex Bar
- Whispbar
$57.00 -
The Pioneer Pickup Kit allows you to strap down items to your Pioneer system very quickly and easily as the ratchet straps come with loops on the end. The mounting blocks are designed with a low profile to minimise wind resistance and are easily installed into the C-Channels of the Pioneer system. You can get on the road faster than ever before.
Features:
- Product comes with 2 ratchet straps (1850mm)
- 4x mouldings (mounting blocks)
- All the required hardware for installation
- Lashing capacity: 225kg
- 1 Year Warranty
$159.00 -
The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays.
Features:
- Easier to slide your load on and off the Pioneer Platform or Tradie
- Simple to fit and easy to use
- Comes with 1x Pioneer Roller with outer sleeve, attachment brackets and hardware
- Made from Alloy and Mild Steel
Sizes:
- Length: 1070mm / 42"
- Weight: 2.44kg / 5.4lb
- Length: 1210mm / 48"
- Weight: 2.65kg / 5.8lb
- Length: 1260mm / 50"
- Weight: 2.72kg / 6lb
Fits
- Rhino Pioneer Trays and Platforms serries 4 and 5 only.
$126.00
