Yakima

  • From $10.00
  • End Cap for Forklift, Frontloader Bike Carriers

    From $10.00
  • Features:

    • Creates up to two mounting points for Bow/Stern Tie-Downs on vehicles without easy access mounting points

    • Two nylon looped straps that can be mounted directly to the vehicle inside the hood

    $20.00



  • From $30.00
  • Give your truck bed a permanent bike mounting solution with this fork style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative.

     

    FEATURES AND BENEFITS

    • A “bolt anywhere” fork style bike mount
    • Single-sided adjustment skewer with long throw for easy bike loading
    • Corrosion-resistant anodised aluminium construction

     

    SPECIFICATIONS:

    WEIGHT: < 0.5 kg (1 lb)

    DIMENSIONS:
    Bracket Length: 10.2 cm (4”)
    Bracket Height: 5.1 cm (2”)

    CAPACITY: 1 Bike

     

     

    FAQ

    Q: Does it carry all bikes?
    A: The BlockHead carries just about any bike with a quick release wheel skewer.  However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with nutted front wheels, triple clamp forks, forks with dropout spacing (the distance between the forks at the tips) other than 100 mm, and some bikes with front disc brakes.

    Q: What is it made of?
    A: The main pedistal is heat-treated and anodized aluminum, the quick-release skewer is primarily stainless steel.

    $59.00
  • Yakima fork adapter 15mm

    This fork adapter allows you to put your 15mm thru axle fork on any fork mounted bike rack.

    Features:

    • 15mm x 100mm
    • Axle is not included
    • Built in safety tabs
    • Durable black powder coat finish
    From $99.00
  • Give your truck bed a permanent bike mounting solution with this fork style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative.

     

    FEATURES AND BENEFITS

    • A “bolt anywhere” fork style bike mount
    • Single-sided adjustment skewer with long throw for easy bike loading
    • Includes locking skewer with SKS LOCK CORE
    • Corrosion-resistant anodised aluminium construction

     

    SPECIFICATIONS:

    WEIGHT: < 0.5 kg (1 lb)

    DIMENSIONS:
    Bracket Length: 10.2 cm (4”)
    Bracket Height: 5.1 cm (2”)

    CAPACITY: 1 Bike

     

     

    FAQS:

     

    Q: What tools do I need?
    A: This application requires drilling holes into your truck; a drill and drill bits will be really handy and a tool to tighten down the bolts or screws and nuts.

    Q: Does it carry all bikes?
    A: The Locking BlockHead carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with nutted front wheels, triple clamp forks, forks with dropout spacing (the distance between the forks at the tips) other than 100 mm, and some bikes with front disc brakes.

    Q: What is it made of?
    A: The main pedestal is heat-treated and anodized aluminum; the quick-release skewer is primarily stainless steel.

    $99.00
  • Don't just throw your bike in the bed of your truck. Mount it. With the BedHead you can fork mount your bike to the inside lip of your truck bed without any drilling. Easy to load, easy on your paint job and hardly takes up any room in your truck bed.

     

    FEATURES AND BENEFITS

    • Ute bed bike fork mount that allows you to attach your bike to the inside lip of your Ute bed rail without any drilling
    • Single-sided adjustment skewer with long throw for easy bike loading
    • Corrosion-resistant anodised aluminium construction
    • Soft padding to protect your vehicle’s paint job

     

    SPECIFICATIONS:

    WEIGHT: 1 kg (2.2 lbs)

    DIMENSIONS:
    Length: 10.2 cm (4")
    Width: 4.5 cm (1-¾")
    Height: 7.6 cm (3")

    CAPACITY: 1 bike

     

    FAQS: 

    Q: Does it lock?
    A: No, but the Locking BedHead does.

    Q: Do I need any tools/drills to apply this?
    A: No tools or drilling required.

    Q: Does it carry all bikes?
    A: The BedHead carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with nutted front wheels, triple clamp forks, forks with dropout spacing (the distance between the forks at the tips) other than 100mm, and some bikes with front disc brakes.

    $99.00
  • Keep your shovel or any other longitudinal gear at easy reach. And free up more space in your vehicle.

    Features:

    • Unique "pop & drop" mechanism - simply pop open the handcuff-sinpired holders and drop your tool in.

    • Securely holds handle diameters between 30-55mm and can also be locked for extra peace of mind.

    • Ideal for tools with straight shafts (shovels), "D" handle (spades), and oval handles (axes), as well as sporting equipment (paddles or oars).

    $99.00
  • This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount.

    FEATURES:

    • 15mm x 110mm

    • Axle is not included

    • Built in safety tabs

    • Durable black powder coat finish

    $109.00
  • Mako Aero

    These practical saddle-style rooftop kayak mounts come with all the hardware you need to secure your boat with a kung-fu grip, yet cradle it gently and keep it looking pretty. Mako Aero saddles fit car rack systems with factory crossbars out of the box, and offer SKS security. Mako Aero rooftop kayak mounts are sold in sets of two, so you can pair them with another set to carry one kayak. Or for super ease of loading, you can pair them with boat load assist HullyRollers.

    FEATURES:
    - Mako pads protect the hull, and Dynaflex™ grips provide a snug hold when you tighten the straps
    - Sold in a set of two saddles, you will need two sets for one vehicle or pair a set of Make Aero Saddles with a set of our HullyRollers to make for easy loading.
    - Padded buckle protects your boat and your vehicle
    - MakoAero saddles fit car rack systems with round, square and factory crossbars out of the box
    - SKS locking system (LOCK CORES sold separately)


    SPECIFICATIONS:
    - Saddle-type carrier that cradles a kayak hull-side down on rack. Universal mounting hardware included.
    - Fit List on carton
    - For use with plastic and composite hulls.
    - Included Mako Pads add an extra layer of protection at contact points with boat to protect hull's finish (suggested for optimal protection of gel-coated composite hulls). The pads also allow for easier sliding of kayak into cradles.
    - SKS compatibility.
    - Use our HeavyDuty strap instead of the two piece strap previously used in the Mako.

    GENERAL INFORMATION:
    DIMENSIONS: 21.6 cm (8.5") H x 19.7 cm (7.75") W x 24.1 cm (9.5") L
    WEIGHT: 1.8 kg (4 lbs)

    $129.00
  • Yakima Crashpad

    Spontaneous bike trips are no sweat thanks to the CrashPad. Load your bike hassle-free on your tailgate, and without worry of damage to your truck. Featuring high-density foam and ballistic nylon construction, this also protects your bikes like no other, and is made to last.

    FEATURES AND BENEFITS
    - Quick and easy installation
    - Ballistic nylon construction with high density foam protects both your Ute and bikes
    - Compatible with most common Utes
    - Heavy duty pad provides superior fit and conforms to the shape of most tailgates

    $189.00
  • Yakima forklift bike carrier

    Feast your eyes on our first-ever fork-style roof rack bike mount with factory crossbar capability right out of the box. (Please note: The ForkLift is recommended for carrying bikes only, not pallets loaded with heavy gear.)

    Specifications

    • Fork to factory bar mount, bike rack. Accommodates disc brakes and standard axles. Long-throw skewer with integrated adjuster knob.
    • Quick and easy, tool-free installation makes life a breeze 
    • Sleek design and automotive finish looks extremely spiffy on your vehicle 
    • Secure and lockable skewer with integrated adjustment knob for single-handed, easy access (SKS lock cores sold separately) 
    • Easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap
    • Fits round, square and most factory crossbars out of the box.

    Features:

    • Simple tool-free installation and removal of the bike mount from your car roof rack 
    • Fits most disc brakes 
    • Secure and lockable skewer with integrated adjustment knob for single-handed, easy access (SKS LOCK CORES sold separately) 
    • Easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap 
    • Fits car rack systems with round, square and most factory crossbars right out of the box 
    • Doesn’t touch the painted surfaces of your bike and makes for a great bike mount for your carbon rig

    General Information:

    • Weight: 7 lbs.
    • Dimensions: 53.5” long
    • Capacity: 1 bike

     

     

     

     

    $249.00
  • The SweetRoll makes loading your kayak or canoe as easy as it's going to get! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. No tools needed to mount the SweetRoll to any bar type, which makes it simple to install. It comes fully assembled right out of the box, and the tilting paddle technology means your roof rack mount can now carry almost any type of kayak or canoe The cherry on top is a spring-loaded base automatically adjusts to kayaks when loading.

    Features:

    • Complete system that includes rear saddles with integrated rollers for easy loading
    • Fully assembled right out-of-the-box
    • Tool free install to round, square, factory and aerodynamic bars
    • Spring-loaded base automatically adjusts to boat when loading
    • Smooth molded pad hugs and protects multiple boat types
    • Tilting paddle technology to accommodate an array of boats and roof rack systems
    • Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
    • Compatible with SKS locking system
    $259.00
  • BigStack

    If you like to head out on the water with your entire posse, you’ve reached the right page of the website. The BigStack rooftop kayak mount’s narrow profile carries up to 4 boats on their sides. (As an added bonus, the word “stack” makes you think of delicious pancakes.)

    Features

    -SteelCore&rade; construction uses a steel tube frame for superior durability
    -Top-of-the-line Hullguard™ padding keeps your kayaks looking brand new
    -Folds down flat when not in use for the ultimate in rooftop clearance
    -Locks to crossbar with SKS system (SKS LOCK CORES NOT INCLUDED)
    -AnchorHead™ tie-down feature makes it easy to manage straps with multiple kayaks
    -Fits car rack systems with round, square and most factory crossbars out of the box

    Specifications

    Universal Kayak carrier. Post-style mount for securing up to 4-kayaks carried on edge (depending on wt limit of vehicle and crossbar length). Fits round, square and most factory racks out of the box.
    -Great for carrying multiple whitewater boats
    -Folds down flat when not in use
    -Integrated Hullguard padding
    -SKS compatible
    -Factory fit list on carton


    General Information:
    Weight: 7.2 lbs.
    Dimensions for each tower:
    22" tall (including bail)
    6" L
    5" W (crossbar footprint)
    Capacity: Up to 4 Kayaks, depending on vehicle limitations.

    $279.00
  • There may be divas on your road trip, but this boat carrier is very low maintenance. With multiple settings, the JayLow allows you to carry one boat in J-Cradle position, two boats in vertical position plus folds down when not in use.

    Features:

    • Carry 1 boat in J-Cradle position or 2 boats in vertical, stacker position

    • Fully assembled right out-of-the-box

    • Tool free install to round, square, factory and aerodynamic bars

    • Adjust the upright position with the easy to use integrated cam lever

    • Easy boat loading with the integrated ramp

    • Folds flat when not in use

    • Includes Heavy-Duty Straps and Bow/stern Tie-Downs

    • Compatible with SKS locking system

    $279.00