Rhino Conduit Clamp 150mm (offset)
This kit consists of 2 clamps to allow a 150mm Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar. The clamps allow mounting of the conduit above or below the bar.
Features:
- Clamps allow fitting of 150mm Conduit Carriers
Fits
- Rhino HD Bar
- Whispbar HD Bar
- Yakima Bar
You May Also Like...
-
Take enough fuel or water to get you to remote destinations with the Rhino-Rack Double Horizontal Jerry Can Holder. This ultra useful new product comes with Ratchet Tie Downs and Locking Cables. This product is a space conscious resolution allowing two jerry cans to be transported easily. Simply attach your jerry cans to the Rhino-Rack Pioneer Tray, Pioneer Tradie or Pioneer Platform using the horizontal jerry can holder and know you've prepared for the adventure ahead.
Features:
- Powder coated steel structure is corrosion resistant
- Carries 2 jerry cans horizontally
- Allows for much more storage space on your roof
- Fits the Pioneer Platform, Pioneer Tradie, Pioneer Tray
- Suits off-road use
- Comes with locking cables to keep your jerry cans secure
- Simple installation and removal
- Adjustable positioning
- Padlock position available for added security
$299.00 -
The Cam Buckle Pioneer Pickup Kit allows you to strap down items to your Pioneer system very quickly and easily as the cam buckle straps come with loops on the end. The mounting blocks are designed with a low profile to minimise wind resistance and are easily installed into the C-Channels of the Pioneer system.
Features:
- Product comes with 2 cam buckle straps
- Straps are 2.2m / 87 inches
- 4 x mouldings (mounting blocks)
- All the required hardware for installation
- 1 Year Warranty
$89.00 -
The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays.
Features:
- Easier to slide your load on and off the Pioneer Platform or Tradie
- Simple to fit and easy to use
- Comes with 1x Pioneer Roller with outer sleeve, attachment brackets and hardware
- Made from Alloy and Mild Steel
Sizes:
- Length: 1070mm / 42"
- Weight: 2.44kg / 5.4lb
- Length: 1210mm / 48"
- Weight: 2.65kg / 5.8lb
- Length: 1260mm / 50"
- Weight: 2.72kg / 6lb
Fits
- Rhino Pioneer Trays and Platforms serries 4 and 5 only.
$126.00 -
The P46-100 is a 4.6 metre long, 100mm diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with our built in Masterkey compatible steel locks.
This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
The conduit can be fitted to the Rhino Heavy Duty Bars using the Rhino Rack conduit clamps RPC4, BC2. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.
Features:
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Recommended maximum carrying capacity is 15kg
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
$421.00
