Rhino Pioneer Pick Up Kit Cam
The Cam Buckle Pioneer Pickup Kit allows you to strap down items to your Pioneer system very quickly and easily as the cam buckle straps come with loops on the end. The mounting blocks are designed with a low profile to minimise wind resistance and are easily installed into the C-Channels of the Pioneer system.
Features:
- Product comes with 2 cam buckle straps
- Straps are 2.2m / 87 inches
- 4 x mouldings (mounting blocks)
- All the required hardware for installation
- 1 Year Warranty
You May Also Like...
-
The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays.
Features:
- Easier to slide your load on and off the Pioneer Platform or Tradie
- Simple to fit and easy to use
- Comes with 1x Pioneer Roller with outer sleeve, attachment brackets and hardware
- Made from Alloy and Mild Steel
Sizes:
- Length: 1070mm / 42"
- Weight: 2.44kg / 5.4lb
- Length: 1210mm / 48"
- Weight: 2.65kg / 5.8lb
- Length: 1260mm / 50"
- Weight: 2.72kg / 6lb
Fits
- Rhino Pioneer Trays and Platforms serries 4 and 5 only.
$126.00 -
The Rhino-Rack Folding Aerial Bracket is designed with versatility in mind offering 180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. The bracket can be installed to roof racks and Pioneer systems and using a C-channel mount and direct attachment to most popular bull bar brands. The bracket also has the option of perpendicular or parallel mounting.
Made of robust fabricated steel for maximum durability and with large internal space for protecting cables and hardware. This product can make your life easier when transitioning from city to bush driving, quickly changing the height of your vehicle.
Features:
- Robust fabricated steel construction for the main body
- A variety of mounting methods including direct attachment to most popular bull bar brands and compatible with
- Rhino-Rack’s Vortex bars, Heavy Duty bars and Pioneer systems
- 180° of rotation with 7 steps
- Anti-rotation hardware can be fixed by hand
- Folding mechanism can be mounted perpendicular or parallel with the car
- Large internal space for aerial hardware/cabling
- Allows for higher placement of aerial for greater reception
- Can be used with sand flags, aerials/antennas, small LEDs or spotlights
- Aerial/antenna mount hole: 17mm diameter
- Bull bar mount hole: 13mm diameter
Fits
- Thule Pro Bar
- Thule Wingbar
- Rhino Vortex Bar
- Whispbar
$146.00 -
Rhino-Rack has designed a new conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
The LSE100H comes as a single endcap but can also be purchase as a pair (LSE100) and is made to suit 100mm PVC pipes (3.9). Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
Overview
- Sold as 1 locking end cap
- Suits 100mm PVC pipes (3.9 inches)
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
$94.00 -
Rhino Eyebolts with Zwifloc
The Eyebolts with Zwifloc™ (4) is designed to provide versatile tie down points for your Pioneer Platforn, Reconn-Deck or Vortex cross bars. The kit includes 4 Eye Bolts, each with the patented Zwifloc channel nut, which allows quick and easy installation anywhere without moving other accessories.
The patented Zwifloc hardware simply drops into the channel, so there is no need to slide into position via a traditional channel aperture. Compatible with all Pioneer systems and Reconn-Deck Bars.
Overview
- Simply twist in and twist out
- The patented Zwifloc channel nut gives you the flexibility to add, remove or reposition the eye bolts anywhere on a PIONEER platform or Reconn-Deck system.
- Personalise your accessory layout. No need to slide the eye bolts into position or move other accessories around - simply place them wherever you need them to be.
- Extra hardware is included to extend their use to Vortex cross bars
- Kit includes 4 x Eye Bolts with Zwifloc drop-in channel nuts and extra hardware
- For Heavy Duty bars refer to eyebolt kit REB.
$85.00
