Rhino Ladder Loaders

Rhino Ladder Loaders
 
 

Whether you're an electrician, plumber, builder or a handyman - you'll need a ladder rack or ladder loader to carry your ladder.

  • Whether you're an electrician, plumber, builder or a handyman - you'll need a ladder rack system to carry your extension ladder safely and securely. The Multi Slide Extension Ladder Rack (3.5m) is a OH&S compliant and Crash tested ladder rack system. It features slide pads that will allow you to load and unload your 3.5 metre extension ladder effortlessly.

    Built from anti corrosive materials this ladder rack is capable of withstanding all manner of extreme environments and weather conditions. And being versatile it can fit to a wide variety of vans, wagons or pickups (utes) via Rhino-Rack's ultra tough Vortex and Heavy Duty bars (sold separately).

    Features:

    • Slide width is 470mm wide
    • Suitable for 3.5 metre extension ladders
    • Includes ladder hoop
    • Includes RLS5 Ladder strap to secure your ladder (if fitted to Vortex bars, it required product #SLS5 at an additional cost)
    $825.00
  • Whether you're an electrician, plumber, builder or a handyman - you'll need a ladder rack system to carry your step ladder safely and securely. The Multi Slide Extension Ladder Rack (3.5m) is a OH&S compliant and Crash tested ladder rack system. It features slide pads that will allow you to load and unload your 3.5 metre step ladder effortlessly.

    Built from anti corrosive materials this ladder rack is capable of withstanding all manner of extreme environments and weather conditions. And being versatile it can fit to a wide variety of vans, wagons or pickups (utes) via Rhino-Rack's ultra tough Vortex and Heavy Duty bars (sold separately).

    Features:

    • Slide width is 680mm wide
    • Suitable for 3.5 metre step ladders
    • Includes ladder hoop
    • Includes RLS5 Ladder strap to secure your ladder (if fitted to Vortex bars, it required product #SLS5 at an additional cost)
    $826.00
  • Whether you're an electrician, plumber, builder or a handyman - you'll need a ladder rack system to carry your extension ladder safely and securely. The Multi Slide Extension Ladder Rack (4.0m) is a OH&S compliant and Crash tested ladder rack system. It features slide pads that will allow you to load and unload your 4.0 metre extension ladder effortlessly.

    Built from anti corrosive materials this ladder rack is capable of withstanding all manner of extreme environments and weather conditions. And being versatile it can fit to a wide variety of vans, wagons or pickups (utes) via Rhino-Rack's ultra tough Vortex and Heavy Duty bars (sold separately).

    Features:

    • Slide width is 470mm wide
    • Suitable for 4.0 metre extension ladders
    • Includes ladder hoop
    • Includes RLS5 Ladder strap to secure your ladder (if fitted to Vortex bars, it required product #SLS5 at an additional cost)
    $847.00
  • Introducing the new Rhino-Rack Slide Out Ladder Loader. Specifically designed for sliding your ladders on and off to prevent work injuries as well as damage to the rear of your vehicle. It is the all in one ladder loader well equipped with many ladder carrying accessories.

    Features:

    • Slide out mechanism to allow easier access to your ladder
    • Slide out mechanism protects damage to your vehicle and to yourself
    • A roller fitted to the end to allow you to easily slide your ladder on and off
    • Easy slides fitted to enable simple loading and unloading
    • Ladder strap and lock to secure your ladder (optional)
    • Ladder hoops to provide added security
    • 2.2m in length which slides out an extra 750mm

    Note: Fitting kits are required to fit the T7-SLRS to your roof racks and are sold separately.

    $1,079.00
  • The OHS Ladder Loader allows you to load and unload a ladder from a high roof vehicle (up to 2.5m) quickly, easily and safely. Australian designed and built, the Rhino OHS Ladder Loader aids in safety, significantly reducing the risk of a manual handling injury. It has also been designed in line with current Australian Work Health & Safety Regulations.

    The OHS Ladder Loader uses a combination of ergonomics, gas struts and structural grade materials to provide a one person, fast and simple way of lifting your ladder. Since the ladder is loaded and secured to the OHS unit at waist-level the risk of injury through climbing onto the vehicle to secure is eliminated.

    Whether you're an electrician, plumber, builder or a handyman the OHS Ladder Loader will save you and your back in the long run.

    Please note in the table below which packing kits / locking tabs are applicable for your chosen bars.

    Vortex

    RLTABM6-8

    Heavy Duty   

    RLTAB-12

    Features:

    • Easy one-person operation
    • Load and unload your ladder without straining your back
    • Safe ground level operation and waist height loading
    • Gas struts and dampers used for easy loading
    • Simple lift and push action
    • Easy to install and use
    • Anti-rattle stop designed to minimise ladder vibration during transport
    • Ladder strap and security cable locks included
    • Santoprene rubber pads to cradle your ladder and protect it from damage
    • Adjustable ladder cradle to suit a range of ladders
    • Fits to a Rhino-Rack Heavy Duty 3 crossbar (minimum) roof rack system
    • Suits extension ladder with van height of up to 2.5m
    • Ideally suited for van but can also be adjusted for utes with posts and roof racks
    • ISO/PA11154:2006 ( E ) City Crash Tested
    • ADR69/00 20g Frontal Impact Tested
    • IEC68-2-64 Vibration Tested
    $3,275.00
  • The OHS Extension Ladder Loader allows you to load and unload a ladder from a high roof vehicle (2.6m - 2.8m) quickly, easily and safely. Australian designed and built, the Rhino-Rack OHS Ladder Loader aids in safety, significantly reducing the risk of a manual handling injury. It has also been designed in line with current Australian Work Health & Safety Regulations.

    The OHS Ladder Loader uses a combination of ergonomics, gas struts and structural grade materials to provide a one person, fast and simple way of lifting your ladder. Since the ladder is loaded and secured to the OHS unit at waist-level the risk of injury through climbing onto the vehicle to secure is eliminated.

    Whether you're an electrician, plumber, builder or a handyman the OHS Ladder Loader will save you and your back in the long run.

    Please note in the table below which packing kits / locking tabs are applicable for your chosen bars.

    Vortex

    RLTABM6-8

    Heavy Duty   

    RLTAB-12

    Features:

    • Easy one person operation
    • Load and unload your ladder without straining your back
    • Safe ground level operation and waist height loading
    • Gas struts and dampers used for easy loading
    • Simple lift and push action
    • Easy to install and use
    • Anti-rattle stop designed to minimise ladder vibration during transport
    • Ladder strap and security cable locks included
    • Santoprene rubber pads to cradle your ladder and protect it from damage
    • Adjustable ladder cradle to suit a range of ladders
    • Fits to a Rhino-Rack Heavy Duty 3 crossbar (minimum) roof rack system
    • Suits extension ladders with van height of up to 2.6m - 2.8m (8.5ft - 9ft)
    • Ideally suited for van but can also be adjusted forpick ups with posts and roof racks
    • ISO/PA11154:2006 ( E ) City Crash Tested
    • ADR69/00 20g Frontal Impact Tested
    • IEC68-2-64 Vibration Tested
    $3,275.00