Rhino

The Pioneer Recovery Track Side Bracket mounts Maxtrax Recovery Equipment at a 75 degree angle to all Rhino-Rack Pioneer systems. The engineering of this product allows you to free up space on the top of your Pioneer system for more adventure accessories. Fits up to 2 recovery track products to your vehicle 

Features:

• Sold in a pair
• Minimal wind noise
• Holds your recovery track products firmly in place
• Fits all Rhino-Rack Pioneer systems
• 320mm in length

Rhino Fixed Mount Leg Kit (High) Rfms

The Heavy Duty RFMS roof rack system permanently attaches to your roof via rivets. Its high profile design is ideal for highly curved roofs or when the extra height is required to level up multiple bars.

Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveller, cyclist, surfer or tradesperson - the Heavy Duty RFMS roof rack system has you covered.

Features:

• Low profile design makes for a great look on your roof
• Strong and built to last
• Compatible with a wide range of accessories
• Tested and approved to meet Australian Standards AS1235-2000

The Pioneer Pickup Kit allows you to strap down items to your Pioneer system very quickly and easily as the ratchet straps come with loops on the end. The mounting blocks are designed with a low profile to minimise wind resistance and are easily installed into the C-Channels of the Pioneer system. You can get on the road faster than ever before.

Features:

• Product comes with 2 ratchet straps (1850mm)
• 4x mouldings (mounting blocks)
• All the required hardware for installation
• Lashing capacity: 225kg
• 1 Year Warranty

Rhino-Rack has designed a new conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

The LSE100 comes as a set of two and is made to suit 100mm PVC pipes (3.9). Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

Features:

• Two conduit locking end caps are included
• Suits 100mm PVC pipes (3.9 inches)
• Integrated lock
• O-Ring seal reduces dust and water build up inside the conduit pipe
• Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
• Simple twist and lift operation
• Lid remains open even when your vehicle is parked on an incline
• Double wall internal pivot plate
• Dynamic testing to AS1235:2000
• Crash tested to ISO11154:2006
• Recommended maximum carrying capacity is 15kg / 33lb
• Designed and Made in Australia
• 5 Year Warranty

For lighter load situations where utility posts are not required. The Heavy Duty Pickup Canopy system is the ideal solution for carrying longer items including ladders and conduits. Its key feature is a base which swivels to allow a better fit to a wider variety of roof shapes including flat, angled and curved. Additionally, its high profile design is ideal for highly curved roofs or when the extra height is required to level out multiple bars.

The RFMC also comes with the GE backing plate which covers up the mounting hardware on the under side to give the inside of your canopy a neat and tidy look.

Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a tradesperson, traveller, cyclist or surfer - the Heavy Duty RFMC roof rack system has you covered.

Features:

• High profile design is ideal for highly curved roofs or levelling bars
• Strong and built to last
• Compatible with a wide range of accessories
• Tested and approved to meet Australian Standards AS1235-2000

Rhino Legs Track Mount (High) Rltf

The Rhino-Rack RLTF Legs are attached to your roof via a set of removable mounting brackets or Rhino's own tracks. Its high profile design is ideal for highly curved roofs or when the extra height is required to level out multiple bars.

For lighter load situations where utility posts are not required. The Heavy Duty Ute Canopy system is the ideal solution for carrying longer items including ladders and conduits. Its key feature is a base which swivels to allow a better fit to a wider variety of roof shapes including flat, angled and curved. Featuring a low profile design, this system is aesthetically pleasing and maintains its durability after years of continuous use.

The RFMPC2 also comes with the GE backing plate which covers up the mounting hardware on the under side to give the inside of your canopy a neat and tidy look.

Utilising our tough Heavy Duty bars, this system offers you compatibility with a wide selection of Rhino-Rack accessories. So whether you're a traveller, cyclist, surfer or tradesperson - the Heavy Duty RFMPC2 roof rack system has you covered.

Features:

• Swivel base allows fitting with a wider variety of roof shapes including flat, angled and curved
• High profile design is ideal for highly curved roofs or levelling bars
• Strong and built to last
• Suitable for heavy off-road use
• Compatible with a wide range of accessories
• Tested and approved to Australian AS1235-2000 standards

The Rhino-Rack RL Leg Brackets are specially designed heavy duty legs to fit to gutter mounts on a vehicle. RL Legs come in a variety of shapes designed to fit specific vehicles. There are four main leg heights depending on how much clearance your roof racks need. RL legs come in 110mm, 150mm, 210m and 280mm heights. Rhino-Rack RL Legs are also compatible with Rhino-Rack Vortex Bars.

Attaching a High Lift Jack directly to your Rhino-Rack Pioneer Tray, Pioneer Tradie or Pioneer Platform has been made simple with the Pioneer High Lift Jack Holder Bracket. Securely attach and lock your High Lifting Jack in place with our strong, durable and corrosion resistant powder coated steel bracket. The Pioneer High Lift Jack Holder Bracket will fit a Pioneer roof system of all different sizes which is another reason Rhino-Rack creates the most useful roof rack systems in the world.

Features:

• Brackets will fit the Rhino-Rack Pioneer Tray, Tradie and Platform of all different sizes
• Mount your High Lift Jack to your Pioneer Platform, Tradie or Tray
• Made from strong, non-corrosive powder coated steel
• Simple installation
• Two brackets are included to secure one High Lift Jack

Horizontally attach your jerry can to the Rhino-Rack Alloy Tray, Pioneer Tray, Pioneer Tradie or Pioneer Platform using the horizontal jerry can holder.

The horizontal design provides maximum stability whilst saving space as well as lowering the height for other items such as luggage bags, gas bottles, spare wheels.

Features:

• Easy to install
• Sturdy and space saving design

If you're an avid camper or like to travel distances in your 4WD, you will know that a spare wheel is one of the essential items you need to bring with you. Rhino-Rack has developed a spare wheel holder for our range of Pioneer Systems and Alloy Trays. Save the room in your vehicle for more passengers and put that spare wheel securely on the roof with the Spare Wheel Holder.

No longer will you need to find the space inside your car to fit a large, bulky wheel. Free up that space by securely mounting it to the top of your vehicle on our Pioneer Platforms, Pioneer Trays, Pioneer Tradies and Alloy Trays using the Spare Wheel Holder.

The unit is easy to fit using a one piece clamping unit. It's made from strong ultra-light materials and comes with a 3 year warranty.

Features:

• Easy to install
• Creates extra room inside your vehicle for family and friends
• Securely fixes the spare wheel to your roof
• Suitable for light off-road use
• Transport your spare wheel outside your vehicle
• Easy to mount
• Made from strong ultra-light materials

The Rhino Pioneer Thru Axle Bike Carrier allows you to attach a thru axle bike directly to a Pioneer system. Designed for strength and durability, it firmly secures your bike whilst reducing any sway and rocking created when driving. The bike mount comes with 15mm x 100mm thru axle insert, with additional sizes available for purchase.

Featuring easy installation, and quick installation, using your existing bike skewer and a quick release strap to safely secure the rear tyre. The mount secures to the Pioneer channels allowing full placement flexibility. The front mount can be turned around to offset handlebars when carrying two bikes if carrying three or more bikes every second mount can be installed back to front to allow for maximum space.  

Features:

• Compatible with all Rhino-Rack Pioneer systems.
• The housing is constructed using a satin black powder coated steel
• The inserts are blue anodised aluminium to prevent rusting
• Pre-assembled
• 15mm x 100mm Multi-Axle Adaptor included
• Compatible with all other Rhino-Rack Thru Axle inserts (view product compatibility for insert sizes)
• All fixings and tools included
• Quick and easy installation/removal
• The fork carrier can be rotated to prevent handlebars clashing
• Rear wheel carrier can be flipped to fit on smaller trays
• Rear wheel strap fits all wheel dimensions
• Front mount height: 95mm
• Rear mount height (without strap): 98mm
• Maximum on-road weight allowance: 17kg/37lbs
• Maximum off-road weight allowance: 11kg/24lbs
• Not suitable for electric bikes (e-bikes)

Keep your home and workspace clear of clutter with the Large Rhino-Rack Wall Hanger. The Wall Hanger allows you to mount and store your luggage box, tray, kayak or anything up to 80kg / 176lb securely to the wall saving floor space. The Wall Hanger can be mounted to suit most wall types including brick, plasterboard and wood. A tie down strap is also included to secure your load. The Wall Hanger features steel tubes that are electroplated and powder coated to resist corrosion when used outdoors.

• Incredible load rating of 80kg / 176lb
• Electroplated and powdercoated steel tube frame for potential outdoor use
• The padded cover is UV stabilised, however, premature fading will occur outdoors compared to indoor use
• Included is a tie down strap to securely strap your gear in place
• Keeps your garage, outdoor area or work space clutter free
• Can mount Luggage Box, Pioneer Tray, Kayak, Canoe, SUP or anything you can imagine
• The Wall Hanger comes with all the necessary parts to assemble and mount

Rhino Fixed Mount Leg Kit (low) Rfmps

Rhino have updated their popular range of flush legs to a new low and high version. Now locking. Now fits the VA bar extrusion. The RVH is the high locking leg (65mm / 2.5") and comes in a set of 4 for 2 cross bars.

Ideal when used with the RCP-BK for flush bar surface mounts, RTV-BK for track mounts.