Yakima
-
A camping necessity, theYakima SkyLoft holds the small, important stuff you always need, keeping them off the floor and right in reach. Clip it inside your SkyRise tent for easy access to headlamps, smartphones and late night snacks. When you wake up, take it outside with you and slide it into the SideTrack™ on your SkyRise tent to stow jackets, towels and toys. The mesh material allows you to see your stuff, and the generous 102 cm x 43 cm dimensions provide plenty of room. Two zippered pockets give you even more storage options; you can even use one of them to store the SkyLoft when it's time to break camp.
Features
- Hanging storage net for the SkyRise tent helps keep your camping gear organized
- Clips inside your SkyRise tent's roof with adjustable straps so your late night essentials are easy to find and out of the way
- See-through mesh material makes it easy to find what you’re looking for
- Two zippered pockets add security and organisation – and one doubles as a storage pouch for your SkyLoft when not in use
- Measures a generous 102 cm x 43 cm to handle enough gear for two or three
- 1 year limited warranty
INSTALLATION
Slides into the SideTrack™ on the outside edge of the SkyRise base and hangs down below the tent floor to stow daytime necessities like cooking supplies and treats for Fido$85.00 -
Don't just throw your bike in the bed of your truck. Mount it. With the BedHead you can fork mount your bike to the inside lip of your truck bed without any drilling. Easy to load, easy on your paint job and hardly takes up any room in your truck bed.
FEATURES AND BENEFITS
- Ute bed bike fork mount that allows you to attach your bike to the inside lip of your Ute bed rail without any drilling
- Single-sided adjustment skewer with long throw for easy bike loading
- Corrosion-resistant anodised aluminium construction
- Soft padding to protect your vehicle’s paint job
SPECIFICATIONS:
WEIGHT: 1 kg (2.2 lbs)
DIMENSIONS:
Length: 10.2 cm (4")
Width: 4.5 cm (1-¾")
Height: 7.6 cm (3")CAPACITY: 1 bike
FAQS:
Q: Does it lock?
A: No, but the Locking BedHead does.
Q: Do I need any tools/drills to apply this?
A: No tools or drilling required.
Q: Does it carry all bikes?
A: The BedHead carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with nutted front wheels, triple clamp forks, forks with dropout spacing (the distance between the forks at the tips) other than 100mm, and some bikes with front disc brakes.$99.00 -
Yakima SightClip 68 Pack of 4
CLIPS FOR FITTING SIGHTLINE LEGS
Tailored to precisely fit flush-mount factory side rails, SightClips secure the SightLine and SightLine FX Legs to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that's super strong, easy to install, and holds on tight.
Features
- Ingenious clips designed to attach SightLine and SightLine FX to flush-mount factory side rails
- Range of clip shapes are engineered for a precise, secure fit to your specific vehicle
- Unique inner and outer clip design delivers exceptional hold
- Powder-coated stainless steel provides maximum strength and durability
- Sold in sets of four - just one kit sets up most systems
$100.00 - Ingenious clips designed to attach SightLine and SightLine FX to flush-mount factory side rails
-
Yakima Landing Pad 15 Pack of 4
SKYLINE LEG MOUNTING ACCESSORY
If you have a vehicle with factory rails, Landing Pads paired with versatile SkyLine or SkyLine FX Legs are the foundation of your StreamLine Roof Rack system. Each Landing Pad is custom made to fit the exact make and model of your car.
Features
- Designed to fit with SkyLine and SkyLine FX legs for the easiest on/off roof rack in the industry
- Each Landing Pad is custom made to fit the exact make and model of your car.
- Use our Vehicle Finder to find out which Landing Pads fit your car
- Includes a snap-on cover when not in use
$100.00 - Designed to fit with SkyLine and SkyLine FX legs for the easiest on/off roof rack in the industry
-
LightenUp™ your path—and easily secure your light bar or a pair of spotlights on your LockNLoad™ platform rack and Yakima® T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima’s new Off-Road Rated standards.
Features
- Unique two part brackets, configurable out-of-the-box in sixteen different orientations
- Rugged steel construction
- Supplied with Torx screws for enhanced security
- Suitable for light bars (up to 10 kg), spot lights, and other accessories
- Compatible with LockN'Load and Whispbar HD crossbars
$109.00 -
Yakima SKS Lock Cores - 8 Pack
SKS stands for "same key system". These 8 cores enable you to lock all of your Yakima products with just one key.
Features
- Fits all lockable accessories
- Includes 8 SKS Cores and matching keys
- 2 keys included plus a control key
$110.00 -
Yakima HD Leg Kit - Pack of 2
The HD Leg features the SmartFoot Technology that seamlessly attaches to your vehicle like no other. Secure and super strong, these are ready for any kind of adventure.
- SmartFoot technology for easy installation and maximum vehicle fit compatibility
- Integrates with the TrimHD Bar Range
- Proven Heavy Duty Leg Design
- Height Packers Available to help with leveling bars
- Easily locks to your vehicle with our SKS system included
$115.00 -
Yakima JetStream FX Flush Bar x 1 - Black
ALUMINUM T-SLOT AERODYNAMIC ROOF RACK CROSSBARS - Flush Bar
JetStream FX has undergone comprehensive wind tunnel testing to ensure exceptional aerodynamics, strength, and lightweight construction. The wing-shaped bar profile is flush with your vehicle, reducing noise and providing a sleek appearance.
Rated to carry a maximum of 75 kg* per pair
- Integrates with FX legs for a flush connected look to your vehicle
- Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic
- Seamless extruded aluminium construction is light, strong and sleek
- T-slot with SmartFill™ push-down infill makes adding your gear and accessories super-fast and easy
- Wing shaped bar profile creates aerodynamic design for reduced wind noise
- JetTruss™ internal support engineering adds serious strength for minimal weight
- Built to last, with engineered light aluminium construction and durable powder-coat or anodisedsilver finish
- Available in Black and Silver
- Integrates with FX legs for a flush connected look to your vehicle
$115.00 -
Yakima fork adapter 15mm
This fork adapter allows you to put your 15mm thru axle fork on any fork mounted bike rack.
Features:- 15mm x 100mm
- Axle is not included
- Built in safety tabs
- Durable black powder coat finish
$119.00 -
Give your truck bed a permanent bike mounting solution with this fork style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative.
FEATURES AND BENEFITS
- A “bolt anywhere” fork style bike mount
- Single-sided adjustment skewer with long throw for easy bike loading
- Includes locking skewer with SKS LOCK CORE
- Corrosion-resistant anodised aluminium construction
SPECIFICATIONS:
WEIGHT: < 0.5 kg (1 lb)
DIMENSIONS:
Bracket Length: 10.2 cm (4”)
Bracket Height: 5.1 cm (2”)CAPACITY: 1 Bike
FAQS:
Q: What tools do I need?
A: This application requires drilling holes into your truck; a drill and drill bits will be really handy and a tool to tighten down the bolts or screws and nuts.
Q: Does it carry all bikes?
A: The Locking BlockHead carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with nutted front wheels, triple clamp forks, forks with dropout spacing (the distance between the forks at the tips) other than 100 mm, and some bikes with front disc brakes.
Q: What is it made of?
A: The main pedestal is heat-treated and anodized aluminum; the quick-release skewer is primarily stainless steel.$119.00 -
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount.
FEATURES:
15mm x 110mm
Axle is not included
Built in safety tabs
Durable black powder coat finish
$119.00 -
Yakima 12 mm x 100 mm Fork Adapter
12 x 100 mm fork adapter for use with fork mount bike racks.
$119.00 -
The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165 lb capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie downs ensure the load is secure.
$119.00 -
Keep your shovel or any other longitudinal gear at easy reach. And free up more space in your vehicle.
Features:
Unique "pop & drop" mechanism - simply pop open the handcuff-sinpired holders and drop your tool in.
Securely holds handle diameters between 30-55mm and can also be locked for extra peace of mind.
Ideal for tools with straight shafts (shovels), "D" handle (spades), and oval handles (axes), as well as sporting equipment (paddles or oars).
$125.00 -
Yakima Straightshot Hitch Extender
Long gone are the days when your vehicle’s spare tire gets in the way of an epic bike trip. This handy little extension adds 18 cmto a 2-inch 5 cm hitch receiver. Giving you the clearance to attach just about any 5 cm bike rack.
Features
- Extends your 2" (5 cm) hitch receiver by 7.25" (18 cm)
- Secures to any 2" (5 cm) hitch receiver using a threaded pin
- Heavy duty steel construction
- Provides clearance to most spare tires; please measure your spare tire before hand
- Compatible with the following Yakima Hitch Racks: OnRamp, HoldUp EVO, HoldUp, TwoTimer (2" only), HangOver 4, FullSwing, and LongHaul
- Weight
- 3.91 kg
- Dimensions
- L 32.38 cm x W 7.62 cm x H 7.62 cm
$129.00
