Rhino

  • The BC3 Conduit Clamp Set will adapt a 100mm(4in) Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 3 clamps and allows for mounting of the conduit above or below the bar.

    Features:

    • Allows fitting of 100mm(4in) Conduit Carriers

     

    Fits

    • Rhino HD Bar
    • Whispbar HD Bar
    • Yakima Bar
    $129.00
  • Rhino 150mm Offset Conduit Clamps [x3]

    This kit consists of 3 clamps to allow a 150mm Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.

    Features:

    • Clamps allow fitting of 150mm Conduit Carriers to Rhino-Rack Heavy Duty Bars
    $129.00
  • Attaching a High Lifting Jack directly to the top of your Rhino-Rack Pioneer System has been made simple with the Pioneer High Lifting Jack Holder Bracket. Securely attach your High Lifting Jack in place with our strong, durable and corrosion resistant powder coated steel bracket. The Pioneer High Lifting Jack Holder Bracket will fit Pioneer Systems of all different sizes which is another reason Rhino-Rack creates the most useful roof rack systems in the world.

    $131.00
  • Allows you to fit small work or spot lights to a Rhino-Rack Pioneer System

    $131.00
  • This Sunseeker Angled Up Awning Bracket is designed to fit onto Rhino-Rack's flush bar roof rack systems such as RV, RSP, SG, StealthBar and 2500 RS. So even if you've opted for one of these sleek profile Rhino-Rack systems there is still the option of attaching a Sunseeker Shade Awning. Rhino-Rack is making sure your options are never limited when pursuing outdoor activities. Included are two brackets and all the hardware required for installation. You will need a 10mm + 13mm socket wrench to install this bracket.

    Features
    Attaches Sunseeker Awning to flush bar roof rack systems including RV, RSP, SG, 2500 RS, and StealthBar
    Included are two brackets and all the hardware required for installation
    Easy to install
    Made from powder-coated steel this product will stand up to the toughest environment and will not corrode

     

     

    $135.00
  • The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention.

    Features:

    • Crash tested for proven reliability
    • Ribbed conduit end cap for added grip
    • Secure wire trace for easier operation and loss prevention
    $138.00
  • The Foxwing ARB/TJM Bracket Kit is designed so that you can fit the Rhino-Rack Batwing Awning to an ARB tray or a TJM tray. Made with powder coated steel this Rhino-Rack Bracket is sturdy and corrosion resistant. Depending on the type of tray or platform you have, Rhino-Rack have engineered an easy to install bracket to ensure you can attach the Foxwing Shade for all adventure opportunities.

    Features
    Designed to fit the Rhino-Rack Foxwing Awning to an ARB tray or a TJM tray
    Made sturdy and corrosion resistant with powder coated steel
    Easy to install
    Adjustable set up depending on ARB or TJM Tray
    The U bolt clamping system is designed up to 28mm diameter steel or Alloy tube

    $138.00
  • Transforming your sleek flush bar roof rack system into a camping and outdoor activity accessory is never easier with the Rhino-Rack Sunseeker Angled Down Awning Bracket. Simply fit this bracket onto your Rhino-Rack RV, RSP, SG or 2500 RS flush bar system and immediately have the ability to take shade wherever you go. Included in the Sunseeker Angled Down Awning are two powder coated steel brackets and the hardware required for installation.

    Features
    Fits Rhino-Rack RV, RSP, SG or 2500 RS flush bar roof rack systems
    Transforms sleek roof racks into an outdoor and camping accessory
    Made from powder coated steel
    Strong, durable and corrosion resistant
    Simple to install

    $143.00
  • The Rhino-Rack Folding Aerial Bracket is designed with versatility in mind offering 180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. The bracket can be installed to roof racks and Pioneer systems and using a C-channel mount and direct attachment to most popular bull bar brands. The bracket also has the option of perpendicular or parallel mounting.

    Made of robust fabricated steel for maximum durability and with large internal space for protecting cables and hardware. This product can make your life easier when transitioning from city to bush driving, quickly changing the height of your vehicle.

    Features:

    • Robust fabricated steel construction for the main body
    • A variety of mounting methods including direct attachment to most popular bull bar brands and compatible with
    • Rhino-Rack’s Vortex bars, Heavy Duty bars and Pioneer systems
    • 180° of rotation with 7 steps
    • Anti-rotation hardware can be fixed by hand
    • Folding mechanism can be mounted perpendicular or parallel with the car
    • Large internal space for aerial hardware/cabling
    • Allows for higher placement of aerial for greater reception
    • Can be used with sand flags, aerials/antennas, small LEDs or spotlights
    • Aerial/antenna mount hole: 17mm diameter
    • Bull bar mount hole: 13mm diameter

    Fits

    • Thule Pro Bar
    • Thule Wingbar
    • Rhino Vortex Bar
    • Whispbar
    $146.00
  • Rhino have updated their popular range of flush legs to a new low and high version. Now locking. Now fits the VA bar extrusion. The RVL is the low locking leg (45mm / 1.7") and comes in a set of 4 for 2 cross bars.

    Ideal when used with the RCP-BK for flush bar surface mounts, RTV-BK for track mounts. 

    $149.00
  • Rhino-Rack has designed a new orange conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

    The LSE100 comes as a set of two and is made to suit 100mm PVC pipes. Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

     

    Features:

    • Two conduit locking end caps are included
    • Suits 100mm PVC pipes (4 inches)
    • Integrated lock, Masterkey compatible
    • O-Ring seal reduces dust and water build up inside the conduit pipe
    • Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
    • Simple twist and lift operation
    • Lid remains open even when your vehicle is parked on an incline
    • Double wall internal pivot plate
    • Dynamic testing to AS1235:2000
    • Crash tested to ISO11154:2006
    • Recommended maximum carrying capacity is 15kg
    • Designed and Made in Australia
    • 5 Year Warranty
    • MasterKey compatible
    $155.00
  • The RCP Base kits are used with Rhino-Rack's range of RC and RV roof rack systems. The kit consists of moulded pads and other various components which attach to the fixed mounting points on your vehicle's roof.

    $93.00
  • Rhino Cross Bar 1650 - Black

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm. All bars include the rubber strip. All Heavy Duty bar lengths include end caps.

    Features:

    • Heavy Duty Bars available to replace your current bars (sold individually)
    • Bars come in black and silver colour options
    • Bars are cut to predefined lengths and are priced accordingly
    • All Heavy Duty bar lengths come with end caps
    • All Heavy Duty Bars come with the rubber strip
    $146.00
  • The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays.

    Features:

    • Easier to slide your load on and off the Pioneer Platform or Tradie
    • Simple to fit and easy to use
    • Comes with 1x Pioneer Roller with outer sleeve, attachment brackets and hardware
    • Made from Alloy and Mild Steel

    Sizes:

    • Length: 1070mm / 42"
    • Weight: 2.44kg / 5.4lb
    • Length: 1210mm / 48"
    • Weight: 2.65kg / 5.8lb
    • Length: 1260mm / 50"
    • Weight: 2.72kg / 6lb

    Fits

    • Rhino Pioneer Trays and Platforms serries 4 and 5 only.
    $126.00
  • The Pioneer Recovery Track Side Bracket mounts Maxtrax Recovery Equipment at a 75 degree angle to all Rhino-Rack Pioneer systems. The engineering of this product allows you to free up space on the top of your Pioneer system for more adventure accessories. Fits up to 2 recovery track products to your vehicle 

    Features:

    • Sold in a pair
    • Minimal wind noise
    • Holds your recovery track products firmly in place
    • Fits all Rhino-Rack Pioneer systems
    • 320mm in length
    $156.00