Rhino Vortex Ladder/load Holder (2)
Rhino Sportz Load Holders (S602)
When looking to secure your load of timber or a ladder on to Sportz bars, then the S602 is ideal. Sold as a set of two holders, they're made from strong ultra light material.
They fit to the Rhino Sportz and Rhino Aero bar only, by sliding into the channel of the bar. They are approx 130mm high
Fits
- Rhino Vortex Bar
You May Also Like...
-
The Ladder Cable Lock (RLLB) is a locking cable. The cable lock is made from plastic-sheathed intertwined steel cords for added strength. Included is a set of two keys just in case you misplace one.
Fits
- Rhino HD Bar
- Whispbar HD Bar
- Yakima Bar
$128.00 -
The Pioneer roller is designed to fitted to the rear of a Platform or Tradie. It runs nearly the full width of the tray and provides a roller to assist in loading ladders, sheets of timber and more. The roller can be fit to new trays or retro-fit to older trays. This kit is not suitable for Pioneer Trays.
Features:
- Easier to slide your load on and off the Pioneer Platform or Tradie
- Simple to fit and easy to use
- Comes with 1x Pioneer Roller with outer sleeve, attachment brackets and hardware
- Made from Alloy and Mild Steel
Sizes:
- Length: 1070mm / 42"
- Weight: 2.44kg / 5.4lb
- Length: 1210mm / 48"
- Weight: 2.65kg / 5.8lb
- Length: 1260mm / 50"
- Weight: 2.72kg / 6lb
Fits
- Rhino Pioneer Trays and Platforms serries 4 and 5 only.
$126.00 -
Rhino Recovery Track Straps
The Recovery Track Straps are designed to be used with our recovery track bracket (#43159) to strap down any track of any brand.
Made from polyester 25mm webbing, with a stainless steel ratchet buckle these straps are strong have have a lashing capacity of 225kg / 496lb.
$120.00 -
Rhino-Rack has designed a new orange conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.
The LSE101H comes as a single endcap but can also be purchase as a pair (LSE101) and is made to suit 100mm PVC pipes (4). Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.
Overview
- Sold as 1 locking end cap
- Bright orange makes your conduit visible
- Suits 100mm PVC pipes (4 inches)
- Integrated lock, Masterkey compatible
- O-Ring seal reduces dust and water build up inside the conduit pipe
- Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
- Simple twist and lift operation
- Lid remains open even when your vehicle is parked on an incline
- Double wall internal pivot plate
- Dynamic testing to AS1235:2000
- Crash tested to ISO11154:2006
- Recommended maximum carrying capacity is 15kg / 33lb
- Designed and Made in Australia
- 5 Year Warranty
- MasterKey compatible
$82.00
