Conduit Clamps

Conduit Clamps
  • Made from galvanised steel, the pipe clamps are sold as a pair.
    They fit into the top channel on a Rhino Vortex cross bar, and secure with an m8 bolt and nyloc nut.

    Fits

    • Rhino Vortex Bar
    • Whispbar
    From $42.00
  • Rhino Pipe Clamps (RPC4)

    Made from galvanised steel, the 4” (100mm) pipe clamps are sold as a pair.
    They fit into the top channel on a Rhino Heavy Duty cross bar, and secure with an m8 bolt and nyloc nut.

    Fits

    • Rhino HD Bar
    • Whispbar HD Bar
    • Yakima Bar
    From $43.00
  • Ideal for use as a replacement or spare, the BCW Conduit End Cap is perfectly suited for use with any of Rhino-Rack’s 100mm(4in) width Conduit Carriers. Like our Conduit Carriers, this product has been crash tested to ensure durability. It also comes with a wire trace to stop you from losing it.

    Features:

    • Fits Rhino-Rack 100mm(4in) Conduit Carriers
    • Secure wire trace to prevent loss
    • Ribbed for extra grip
    • Crash tested for proven reliability
    $50.00
  • The BC2 Conduit Clamp Set will adapt a 100mm(4in) Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.

    Features:

    • Allows fitting of 100mm(4in) Conduit Carriers

     

    Fits

    • Rhino HD Bar
    • Whispbar HD Bar
    • Yakima Bar
    $56.00
  • Ideal for use as a replacement or spare, the BC150 End Cap is perfectly suited for use with any of Rhino-Rack’s 150mm(6in) width Conduit Carriers. Like our Conduit Carriers, this product has been crash tested to ensure durability. It also comes with a wire trace to stop you from losing it.

    Features:

    • Fits Rhino-Rack 150mm(6in) Conduit Carriers
    • Secure wire trace to prevent loss
    • Ribbed for extra grip
    • Crash tested for proven reliability
    $67.00
  • This kit consists of 2 clamps to allow a 150mm Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar. The clamps allow mounting of the conduit above or below the bar.

    Features:

    • Clamps allow fitting of 150mm Conduit Carriers

     

    Fits

    • Rhino HD Bar
    • Whispbar HD Bar
    • Yakima Bar
    $69.00
  • The Conduit Lower Side Bracket allows for the Rhino-Rack BC3 conduit clamp to be mounted off the side giving more space along the cross bars for other equipment such as ladders and other work gear.

    The BC3 conduit clamp is not included and needs to be purchased separately.

    Features:

    • 3 brackets are included
    • Mount the conduit off the side of your cross bars
    • Allows for sliding door clearance
    • Gives more space across the cross bars for other items such as ladders and work gear
    • Adjustability in mounting position to accommodate most vans and vehicle widths
    • Made from stainless steel and nylon mouldings
    • All hardware is included to fit onto Heavy Duty cross bars

    Fits

    • Rhino HD Bar
    • Whispbar HD Bar
    • Yakima Bar
    $95.00
  • The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention.

    Features:

    • Crash tested for proven reliability
    • Ribbed conduit end cap for added grip
    • Secure wire trace for easier operation and loss prevention
    $99.00
  • Reinforced for carrying copper pipes, this front end cap is designed to ensure your copper pipes (up to a total weight of 15kgs/33lbs), stay secure in your conduit. When braking suddenly, this Conduit End Cap will prevent your piping from spilling out over the road.

    Made from injection moulded PVC, the BCW-C has a metal reinforced high density foam core. Secure the End Cap onto the front of your conduit, securing the wire trace onto the hex bolt of the conduit tube to prevent loss.

    For the rear of your conduit, we recommend the BCW. Crash tested and also supplied with a secure wire trace.

    Features:

    • Provides extra security for heavy duty loads in your conduit
    • Fits Rhino-Rack 100mm(4in) Conduit Carriers
    • Includes Secure wire trace to prevent loss
    • Crash tested for proven reliability
    $107.00
  • Rhino-Rack has designed a new conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

    The LSE100 comes as a set of two and is made to suit 100mm PVC pipes (3.9). Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

    Features:

    • Two conduit locking end caps are included
    • Suits 100mm PVC pipes (3.9 inches)
    • Integrated lock
    • O-Ring seal reduces dust and water build up inside the conduit pipe
    • Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
    • Simple twist and lift operation
    • Lid remains open even when your vehicle is parked on an incline
    • Double wall internal pivot plate
    • Dynamic testing to AS1235:2000
    • Crash tested to ISO11154:2006
    • Recommended maximum carrying capacity is 15kg / 33lb
    • Designed and Made in Australia
    • 5 Year Warranty
    $129.00
  • Rhino-Rack has designed a new orange conduit locking end cap that is a game changer. This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

    The LSE100 comes as a set of two and is made to suit 100mm PVC pipes. Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

     

    Features:

    • Two conduit locking end caps are included
    • Suits 100mm PVC pipes (4 inches)
    • Integrated lock, Masterkey compatible
    • O-Ring seal reduces dust and water build up inside the conduit pipe
    • Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
    • Simple twist and lift operation
    • Lid remains open even when your vehicle is parked on an incline
    • Double wall internal pivot plate
    • Dynamic testing to AS1235:2000
    • Crash tested to ISO11154:2006
    • Recommended maximum carrying capacity is 15kg
    • Designed and Made in Australia
    • 5 Year Warranty
    • MasterKey compatible
    $129.00
  • The Conduit End Cap & Sleeve is the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Cap & Sleeve features a ribbed end cap for added grip as well as a secure wire trace for easier operation and loss prevention.

    Features:

    • Crash tested for proven reliability
    • Ribbed conduit end cap for added grip
    • Secure wire trace for easier operation and loss prevention
    $215.00
  • The P30-100 is a 3 metre long, 100mm diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with our built in Masterkey compatible steel locks.

    This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

    Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

    The conduit can be fitted to the Rhino Heavy Duty Bars using the Rhino Rack conduit clamps RPC4, BC2. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.

    Features:

    • Integrated lock, Masterkey compatible
    • O-Ring seal reduces dust and water build up inside the conduit pipe
    • Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
    • Simple twist and lift operation
    • Lid remains open even when your vehicle is parked on an incline
    • Double wall internal pivot plate
    • Dynamic testing to AS1235:2000
    • Crash tested to ISO11154:2006
    • Recommended maximum carrying capacity is 15kg
    • Designed and Made in Australia
    • 5 Year Warranty
    • MasterKey compatible
    $244.50
  • The P46-100 is a 4.6 metre long, 100mm diameter Conduit Carrier with Ribbed Conduit End Caps that provide maximum security with our built in Masterkey compatible steel locks.

    This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

    Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

    The conduit can be fitted to the Rhino Heavy Duty Bars using the Rhino Rack conduit clamps RPC4BC2. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.

    Features:

    • Integrated lock, Masterkey compatible
    • O-Ring seal reduces dust and water build up inside the conduit pipe
    • Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
    • Simple twist and lift operation
    • Lid remains open even when your vehicle is parked on an incline
    • Double wall internal pivot plate
    • Dynamic testing to AS1235:2000
    • Crash tested to ISO11154:2006
    • Recommended maximum carrying capacity is 15kg
    • Designed and Made in Australia
    • 5 Year Warranty
    • MasterKey compatible
    $360.00
  • Keeps and protects your pipes in the safest possible way.

    Features:

    • Constructed in brushed stainless steel, it has double openings to make loading and unloading your pipes easy
    • The box closes up using lockable snaplocks, making the pipes safe and secure during transport and theft more difficult
    • Takes pipes up to 3 metres long.

    Fits

    • Thule Pro Bar
    $1,199.00